描述
酒店浴室壁挂电话 固定电话
模型: ECG-726 OEM MOQ 1000 件或 3000 每个型号的件数
Structural features:
The hotel standard 86 box structure special bathroom wall telephone, which is installed on the 86 box bracket in a simple installation method, and the 86 box is embedded in the wall,
The dimensions of the bathroom call device are smaller than the dimensions of the single 86 box in the dark box wall, and the panel can be embedded in the single 86 box in the dark box wall for installation, and the dimensions of the panel cover are larger than the dimensions of the single 86 box in the dark box wall,
so that the panel cover can cover the box opening of the single 86 box in the dark box wall after installation, and has the advantages of small height protruding from the wall, fixed structure not exposed and easy to disassemble.
The product is installed based on the 86 box structure, without the need for traditional telephone curves, beautiful, simple, elegant, and very personalized hotel characteristics.
深圳东线是中国最专业的酒店电话工厂.
Installation method
1) Connect the two-core wires of the telephone to the T/R terminal of the bathroom telephone.
2) Install the metal bracket on the 86 box and fix it with screws.
3) Install the bathroom wall telephone on the 86 box bracket and push it in hard, then the magnet will attract it.
4) Refer to the following installation methods for single 86 and double 86 connected structures.
Simple operation instructions:
1. Answering the phone
When there is an incoming call from an external line, the panel bathroom phone will ring. At this time, press the hands-free button to talk to each other. You can hear each other’s voice and talk within one meter of the panel. Press the hands-free button to hang up.
2. SOS emergency call button (the way to connect to the guest control host is to provide dry contact signal)
When the guest presses this button, the bathroom phone provides a dry contact signal to the guest control host RCU to trigger the guest control system. The guest control system starts the background alarm device and obtains the alarm information in the background.
3. SOS emergency call button (connected to the switch PBX)
When the guest presses the SOS emergency call button, the panel bathroom phone can call the emergency center with one click and contact the emergency center.
4. Do not disturb button This button also provides a dry contact signal and is connected to the guest control host. When this button is pressed, the DND do not disturb function is activated, and the corresponding indicator light on the doorplate at the door is lit to prompt the do not disturb information.
5. Customer Service Center Button
When the bathroom phone is in standby mode, if the guest presses the customer service center button, the bathroom phone will directly dial the number, connect to the customer service center, and start the hands-free function. At this time, you can talk to the customer service center. When you are finished, press the hands-free button to end the call.
6. Make and receive calls
When the bathroom phone is in standby mode, if the guest wants to make a call, just press the hands-free button on the phone, then press the corresponding number on the keyboard to make a call. When the call is finished, press the hands-free button to hang up.
Technical requirements:
1. Audio dialing:
Low frequency group: 697, 770, 852, 941赫兹
High frequency group: 1209, 1336, 1477赫兹
2. Low frequency group level: -9dBm±3
3. High frequency group level: -7dBm±3
4. Dual audio dialing frequency difference: ±1.5%
5. Dual audio dialing level difference: 2±1DB
6. 环境温度: -10℃～40℃
7. 相对湿度: 10%～95%
8. Atmospheric pressure: 86～106KPa
9. 环境噪音: ≤60分贝(千兆位 WiFi)
10. 工作频率: 300～3400Hz
